Domestic excavator parts manufacturers will popularize the safety items that need to be paid attention to during the daily maintenance and protection of excavators, so as to avoid personal injury and equipment damage due to improper protection.

1. Understand the inspection and protection methods: incorrect protection will not only damage the machine, but also cause personal accidents during the protection process, such as being clamped or scalded. Before inspection and protection, please read the instruction manual thoroughly and fully understand the protection methods (things required for safe operation, qualifications, important parts, determining work instructors, wearing protective equipment, etc.), pay attention to safety, and carefully inspect and protect.

　　2. Cleaning up, rectifying and cleaning the work site: When checking the protection, if the work site is disorderly, it may cause the machine to tip over, or the operator may be injured by debris. Please clean up the debris that damages the site environment, remove butter, oil, paint and debris, and clean up, rectify, and clean to facilitate safe operations.

　　3. The warning sign when checking and protecting: When checking and protecting the machine, if someone starts the engine or moves the operating lever, it may cause serious damage, so hang a "no operation" sign on the control lever. If required, warning signs should also be placed around the machine.

4. Use appropriate things: keep the things needed for maintenance properly, do not use them for other purposes, and use appropriate things to protect or repair the machine. If anything falls into the machine, it will cause damage or error. action. When opening the inspection window or the fuel filler port of the fuel tank to view, please place the parts or things away from the open area to avoid falling into the equipment and causing unnecessary damage

5. Pay attention to high-temperature parts: To avoid scalding caused by hot water or steam eruption, when checking or discharging cooling water, after confirming the shutdown, when the equipment is cooled to the point where you can touch the radiator cover with bare hands, loosen the screw cover slowly After the internal pressure in the radiator is released, the screw cap will be unscrewed in the future. In order to avoid hot oil spraying or touching high-temperature parts and causing scalding, when checking and discharging the oil, after confirming that the machine has stopped, the equipment has been cooled to the point where it can be touched with bare hands. After touching the cap and cock, slowly loosen the cap and cock, and then unscrew them after the internal pressure is released. Domestic excavator accessories

　　 6. Pay attention to high-pressure oil: there is always internal pressure in the hydraulic circuit. Before the internal pressure is zero, do not add oil, drain oil or check protection operations. Even if high-pressure oil leaks from a small hole, touching the skin or eyes is a proper risk. Please wear goggles and gloves, and place a thick paper or board on the leak site for inspection. If high-pressure oil enters the body due to touching high-pressure oil, please go to the hospital for treatment immediately.

　　7. Pay attention to rotating parts: If it is caught by rotating parts such as fan blades or belts, it will become a serious injury accident. It is necessary to wait for the rotation part to stop completely before performing protection and other operations. When you have to protect the engine when the engine is running, you must follow the instructions below: There must be one person sitting on the driving seat, so that you only need to get the shutdown information from other people and stop the engine immediately.

　　 8. Pay attention to ventilation: If protection is carried out indoors or in a place with insufficient ventilation, it is easy to cause gas poisoning. Especially the easily diffusible substances such as engine exhaust, fuel, cleaning oil, paint, etc., are likely to accumulate to a certain harmful concentration in a closed space, so adequate ventilation is required. When protecting or operating indoors, extend the exhaust pipe to the outdoors, and open doors and windows to allow air to circulate; or install a ventilation fan as required.

For more information about excavator accessories, please visit Chuanna Industrial (www.acgway.com). I hope this article "Domestic Excavator Accessories Popularize Excavator Safety Maintenance" will be helpful to everyone. If you still don’t understand, you can directly leave a message or consult Chuanna Hydraulics National Service Hotline 15850333149, we will solve your doubts as soon as possible!